{"id":533,"date":"2022-07-11T12:08:35","date_gmt":"2022-07-11T12:08:35","guid":{"rendered":"https:\/\/wordpress-799591-2908548.cloudwaysapps.com\/?p=533"},"modified":"2024-09-18T13:59:33","modified_gmt":"2024-09-18T08:29:33","slug":"how-to-drill-into-tile","status":"publish","type":"post","link":"https:\/\/www.orientbell.com\/blog\/how-to-drill-into-tile\/","title":{"rendered":"How To Drill Into Tile Without Breaking It?"},"content":{"rendered":"

This expert step-by-step guide will share how to drill through a tile without damaging it.<\/em><\/p>\n

\"Drilling<\/em><\/p>\n

Are you looking to fit accessories or storage units to a tiled wall?\u00a0<\/strong>Maybe you need to install lights, or perhaps you’re putting up shelves. No matter the reason, drilling in tile can be a pain. You have to be cautious not to break the tile and getting the drill bit into place without cracking the tile or chipping it up is tough.<\/p>\n

Some\u00a0stronger tiles\u00a0<\/a>are ‘relatively’ less prone to breakage than others. The article will show you how to avoid breaking your tiles when drilling holes in them and avoid wasting time on this task by drilling quickly and efficiently.<\/p>\n

Also Read<\/strong>:\u00a0Ceramic vs Vitrified Tiles: 7 Key Differences<\/a><\/p>\n

How to Drill Into Ceramic Tiles?<\/strong><\/h2>\n

Drilling holes in\u00a0ceramic tile<\/a>\u00a0 is a ‘relatively’ simple task. However, whichever tile you have put, make sure to drill a hole carefully. If you’re not careful, you could end up with broken tiles and frustration! Nevertheless, there are a few deeds you can do to make your drilling as smooth and effective as possible.<\/p>\n

Here are some considerations you need to keep in mind:<\/h2>\n
    \n
  1. Ensure your tile is clean and dry. Because dirt and moisture can cause the drill bit to slip or get stuck, resulting in damage to your tile or tool. Keep the area around where you’re drilling clear of debris, too\u2014you don’t want anything getting into your drill bit!<\/li>\n<\/ol>\n
      \n
    1. Next, ensure your drill bit has been properly sharpened. Dull bits can cause more friction than sharp ones, meaning slower drilling speeds (potentially more damage).<\/li>\n<\/ol>\n
        \n
      1. The proper speed for drilling holes in a tile depends on what type of drill. For example, if you’re using a cordless drill with variable rates, start at about 3\/4 speed and work up from there; for a corded drill with only one speed, start at full power immediately.<\/li>\n
      2. Use a hammer drill bit instead of a regular drill bit because hammer drills can drill through hard materials like concrete, stone, and ceramic tiles without breaking them\u2014and they’re much more potent than regular drill bits.<\/li>\n
      3. Drill slowly at first so that the bit doesn’t get stuck or break off inside the tile while trying to make your hole as deep as possible before it gets stuck there! (It will happen eventually)<\/li>\n
      4. Once you’ve drilled, use an old toothbrush or other small brush to sweep out all those little pieces left behind by your drill bit.<\/li>\n<\/ol>\n