14 Jun 2023, Read Time : 7 Min

How to Remove Cement From Tiles – Home Remedies?

Stepping into a newly built or renovated place can be highly satisfying until you notice unpleasant-looking cement stains on your magnificent tiles. Those messy cement stains, which can be leftovers from recent renovations, can be a real eyesore. But don’t worry! This blog answers questions asked by consumers who don’t want to pull down the new look of their home, like how to remove cement stains from tiles, and how to remove dried cement from floor tiles. we’ll show you how to free yourself from cement’s grip and restore the beauty of your tiles to their former glory.

Helpful Methods to Clean Cement Stains from Tiles

You can use different techniques to take off the unpleasant-looking cement stains from tiles offering a range of options like how to remove cement from tiles and how to clean cement off tiles. While some of the solutions listed here involve natural ingredients, they might not be effective on tougher stains. They are, however, easy on the hands and the pocket! Let’s explore each method and uncover the magic it contains:

Vinegar Solution

Vinegar is a multipurpose kitchen product and the most low-cost solution to the question that people ask about how to clean cement off tiles or how to get cement off tiles. Vinegar should first be diluted with water in an equal ratio. Apply the solution to the trouble spots, then give it some time to absorb. Scrub the stains lightly with a scrub brush or a non-abrasive sponge. If required, rinse the tiles once again with fresh water. Vinegar is a mild acidic solution that might help take away the gentler stains.

Lemon Juice and Baking Soda Paste

When combined, lemon juice and baking soda produce a potent, all-natural cleaning solution that is capable of removing cement stains. To create a paste-like consistency, combine baking soda and lemon juice. After applying the paste to the stained areas, let it sit for a while. After that, carefully scrub the spots with a gentle brush or sponge. Baking soda’s abrasiveness and the citric acid in lemon juice combine to loosen and remove cement streaks as best as possible. 

Commercial Cleaners

Cement stains on tiles can be removed using a variety of industrial cleaners that are readily accessible. The purpose of these specialised products is to dissolve and eliminate cement stains from a variety of surfaces, including tiles. Before using, it is recommended to carefully read the instructions on the product since each brand might have different usage recommendations. Apply the cement remover to the stained spots, give it time to soak in, and then scrub delicately. After that, rinse well to remove any leftovers.

Hydrochloric Acid (Caution: Handle with Care)

Hydrochloric acid is a powerful solution that should be used cautiously when dealing with stubborn cement stains. However, use this method carefully and ensure you have enough ventilation, also dilute the acid before use. Follow the manufacturer’s recommendations when diluting the hydrochloric acid. Applying the solution to the stained regions using a brush with acid-resistant bristles. Allow it to rest for a while, but stay away from close contact for too long. Finally, give the tiles a good water rinse.

Acetone

Acetone is a strong liquid, having the ability to dissolve cement. However, care must be taken while using the same, since it can be corrosive; it is important to consider the type of tiles concerned, given that acetone should only be used on unglazed surfaces which may be present on tiles. It is strongly advised to perform a test in a discrete area before extensive use to evaluate any possible effects and confirm compatibility with the surface material. Furthermore, when dealing with acetone, it is vital to put on the proper gloves to avoid any bad reactions.

Sugar Paste

This might sound unusual, but another technique for how to remove cement from tiles or how to clean cement off tiles is to make a paste out of equal parts sugar and water. This paste has some abrasive traits and can help to loosen cement deposits, which is mainly useful for glazed tiles. It is fine to apply this paste and allow it to sit for approximately fifteen minutes so that the cement residue can gradually break down and melt. Without endangering glazed tile surfaces, cement build-up can be efficiently removed by the use of this method and gently scrubbing the affected area. For those looking for a softer solution for their tile cleaning needs, this alternative paste made of sugar and water is safer and kinder.

Before removing cement stains from tiles, it’s crucial to remember that different types of tiles may call for different cleaning procedures. Some tiles may even get damaged if strong acid is used on them. Therefore, approaching the manufacturer for instructions is a good idea.

Steps to Prevent Cement Stains during Tile Installation

When installing tiles, you can follow the steps mentioned below to prevent cement stains:

Utilise a Grout Release

A grout release agent is a transient, water-soluble surface covering that prevents the tile from getting stained when employing pigmented grout. Consider using a grout release agent on the tile’s surface before you apply the cement. Doing so will form a barrier between the cement and the tile’s surface, making any future stains easier to clean up.

Use Protective Coverings

To shield them from unintentional cement spills or splatters, use plastic or drop cloths to cover nearby surfaces, such as counters, fixtures, and flooring. To prevent moving during installation, firmly fix the coverings in place.

Plan the Tile Layout

Plan the tile layout to reduce the need for trimming tiles or making alterations during installation. This lessens the possibility of producing extra cement that could result in discolouration.

Work in Small Sections

Apply cement in small sections as opposed to covering the entire surface all at once. This strategy reduces the possibility of cement drying before you can adequately clean it and enables you to concentrate on a small region.

Use a Sandpaper

Tiles can be softly wet sanded with extra-fine sandpaper (400 grit or finer) to remove certain difficult-to-clean stains. Additionally, use water to avoid scratching during sanding.

Clean as You Go

As you work, wipe off any cement that comes into contact with the tiles or the areas surrounding them. Before the cement dries, remove any excess with a wet sponge or towel. Avoid dragging cement across the tile’s surface to prevent spreading or further discolouration.

Choose the Right Tool

Deciding on the proper tools is crucial while starting a project. For example, it’s useful to apply a margin trowel with a notched edge as it facilitates precise adhesive placement. Thus, there is less hazard that extra adhesive will leak out and probably result in staining problems. Therefore, deciding on the proper tools can significantly enhance the final product of your work.

Vacuum Regularly

Dust and other debris mixed with the cement can cause an unremovable film to form on your tile. Frequent vacuuming of the work area can be a very good countermeasure to this problem. Not only will you be able to maintain a cleaner workspace, but you will also be able to lessen the possibility that this unpleasant film will become embedded in your floor.

Also Read: How to Remove Scratches From Tiles?

How Can Orientbell Tiles Help?

At Orientbell Tiles, we offer high-quality tiles in a variety of designs and finishes. We are offering everything from the classic charm of cement tiles to unmatched protection against scratches. In addition, we have an amazing feature called “Trialook” which you can use to visualise the most suitable tile for your home. Visit our website or a store near you for the tiles that will work best for your project.

FAQs

• How do you remove dried cement from tiles?

Use vinegar water to remove light stains. For the tougher ones, make a paste with lemon juice and baking soda. Put on some gloves; commercial cleaners or professional treatment may be required to eliminate stubborn stains.

• What is the best way to remove tile cement?

The severity of the stain will determine what the best method to apply is. For easy stains, try vinegar. For tougher staining, paste lemon juice and baking soda. For stubborn stains, you might have to turn to commercial cleaning agents or a grout saw. As always, test in a corner first!

• What chemical removes cement from tiles?

Minor stains can make use of vinegar or baking soda, while bigger, more stubborn stains require store-bought cement removers. They are designed to get rid of tough cement residues in a quick and efficient manner.

• What products remove cement?

Tiles with light-coloured cement stains can be treated with a paste of vinegar or baking soda. For more difficult jobs, there are various commercial cement removers that, used with caution, or a sugar soap solution, do an efficient job.